QuickLogic QuickAI

Data Collection Firmware

QuickLogic QuickAI binaries and flash instructions can be found at http://quickai.quicklogic.com

Viewing Knowledge Pack Recognition Results

When a Knowledge Pack is flashed on the board, the classification results can be viewed by connecting to the virtual COM port in a terminal application. Follow the steps below for viewing the recognition results:

  1. Plug in your QuickAI device via serial USB cable

  2. Open a terminal emulator (such as Tera Term)

  3. Set your serial speed to 115200

  4. Create a new connection to your QuickAI COM port

You will now see classification results printed in the terminal