How to Flash Your Device

Now that you’ve generated a Knowledge Pack you just need to put it on a device! In order to do this you will need to install extra drivers and utilities for your hardware platform of choice.

SensorTile

First, download and install the drivers that come with the ST-Link utility. See instructions for where to find the ST-Link Utility at the link SensorTile Firmware.

Once you have the drivers installed there are two ways you can flash your Knowledge Pack.

  1. ST-Link Utility: You can use the ST-Link Utility software to flash your device by following the tutorial at Flashing SensorTile With ST-Link Utility

  2. SensiML Flash Widget: Alternatively, we have created a one-click flash method in Analytics Studio Notebook by using the Flash Widget Tutorial

QuickAI

You will use the QuickAI Flash Bundle to flash your new Knowledge Pack to a device. The QuickAI hardware flash tools can be downloaded from http://quickai.quicklogic.com

  1. Find the readme file and follow the instructions

Nordic Thingy

First, download the Nordic Thingy Firmware Bundle. In this bundle there is a PDF called Flashing Firmware to Nordic Thingy. Follow the instructions in 2.0 Preparing Your Device for the First Time to install the necessary drivers and software.

Once you have the drivers installed there are two ways you can flash your Knowledge Pack.

  1. nRFgo Studio: You can use the nRFgo Studio software to flash your device by following the tutorial in 3.0 Flashing a Knowledge Pack J-Link of from the flash bundle downloaded above

  2. SensiML Flash Widget: Alternatively, we have created a one-click flash method in Analytics Studio Notebook by using the Flash Widget Tutorial